TECHNICAL INFORMATION POWDERGALV® STANDARD
PRODUCT DESCRIPTION
Licensed process of coating raw steel with Hot Dipped Galvanized to meet ASTM 123/A and Super Durable Polyester TGIC-free powder coating. It is designed for environments needing high performance anti-corrosion properties with good mechanical and chemical performance.
Colors available are contained in the United States standard 188 RAL powder coating deck.
Many applications, including:
- Light Poles
- Utility Poles
- Fencing
- Railings
- Water Parks
- Cooling Towers
- Structural Steel Projects
Notes:
POWDERGALV® can only be applied by trained licensed companies. It is a coating process that specific procedures and equipment is necessary to accomplish.
APPLICATION
Film Thickness Range (mils.): 4-8
PERFORMANCE
60 Gloss
(ASTM D-523)
- 70-76
Adhesion
(ASTM D-4541)
- QUVA G154 250 hours
- No adhesion loss
Creepage
(ASTM D-1654)
- Salt Spray 2500 hours
- Rating 10 (No creep from scribe) at 2500 hours
Pencil Hardness
(ASTM D-3363)
- QUVA G154 at 250 hours
- H
Degree of Rusting
(ASTM D-610)
- QUVA G154 at 250 hours
- H
Degree of Blistering
(ASTM D-714)
- Salt Spray 1500 hours
- No Blisters
Abrasion Resistance
(ASTM D-4060)
- 1800 cycles
- Loss .25 (abrasive resistance at with CS10 Wheel 1000 gr)
Gravelometer
(ASTM D-3170)
- Rating 6(18 chips)
- Rating A (>1mm)
Note:
Performance measured using 12-gauge test panels
Note:
Technical Data are periodically updated to reflect new information relating to the product. It is important that the customer obtain the most recent Data sheet for the project being used. The information rating and opinions stated above pertain to the material currently offered and represent the results of tests believed to be reliable. However, due to variation in customer handling and field applications, which are not known, or under our control, the POWDERGALV® process cannot make any warranties or guarantees as to the end results.
Download PDF
TECHNICAL INFORMATION POWDERGALV® PLUS
PRODUCT DESCRIPTION
This is a Licensed process of coating raw steel with Hot Dipped Galvanized to meet ASTM 123/A, NSF/ANSI 61 tested and certified epoxy powder mid coat, and polyester TGIC-free powder topcoat. It is designed for environments needing high performance anti-corrosion properties with good mechanical and chemical performance.
Colors available are Semi-Gloss black.
Many applications, including:
- Light Poles
- Utility Poles
- Fencing
- Railings
- Water Parks
- Cooling Towers
- Structural Steel Projects
Notes:
POWDERGALV® can only be applied by trained licensed companies. It is a coating process that specific procedures and equipment is necessary to accomplish.
APPLICATION
Film Thickness Range (mils.): 16-25
PERFORMANCE
60 Gloss (Immersion 168 Hours)
(ASTM D-523)
- Sodium Chloride (10%)
- Loss .2 Degree
- Sulfuric Acid (10%)
- Loss .4 Degree
- Mineral Spirits (18%)
- Loss 5.2 Degree
Adhesion
(ASTM D-4541)
- QUVA G154 250 hours
- No Loss Adhesion
- Salt Spray 1440 hours
- 2.9 MPA (No Loss Adhesion, fixed alignment, Method B)
- Humidity 1440 hours
- 5 MPA (No Loss Adhesion, fixed alignment, Method B)
Creepage
(ASTM D-1654)
- Salt spray 1500 hours
- Rating 10 (No creep from scribe)
- Humidity 720 hours
- No creep from scribe
Pencil Hardness (Immersion 168 Hours)
(ASTM D-3363)
- Sodium Chloride (10%)
- 2H
- Sulfuric Acid (10%)
- H
- Mineral Spirits (18%)
- 2H
- Sodium Hydroxide (10%)
- 2H
Adhesion (Immersion 168 Hours)
(ASTM D-3353)
- Sodium Chloride (10%)
- 5B
- Sulfuric Acid (10%)
- 5B
- Mineral Spirits (18%)
- 5B
- Sodium Hydroxide (10%)
- 5B
Degree of Blistering
(ASTM D-714)
- Salt spray 8000 hours
- No Blisters
Degree of Rusting
(ASTM D-610)
- Salt Spray 8000 hours
- Grade 10 No Rust
Abrasion Wheel
(ASTM D-4060)
- 1800 Cycles
- Loss 0.4 (abrasion resistance CS10 wheel 1000gr)
Gravelometer
(ASTM D-3170)
- Rating 8 (14 chips)
- Rating A (>1mm)
This product has been tested and met ISO 12944-6 C5M.
Note:
Performance measured using 12-gauge test panels
Note:
Technical Data are periodically updated to reflect new information relating to the product. It is important that the customer obtain the most recent Data sheet for the project being used. The information rating and opinions stated above pertain to the material currently offered and represent the results of tests believed to be reliable. However, due to variation in customer handling and field applications, which are not known, or under our control, the POWDERGALV® process cannot make any warranties or guarantees as to the end results.